TREVOS PRIMA LED SENSOR -Smart lighting are simpler than you think!
top of page

TREVOS PRIMA LED SENSOR -Smart lighting are simpler than you think!

PRIMA LED product line has been expanded to luminaire PRIMA LED Sensor equipped with the latest microwave motion sensor.


PRIMA LED

One-row plastic industrial LED light fitting, with diffuser made of translucent polycarbonate.

The light fitting is suitable for industrial indoor and outdoor roofed spaces, warehouses, sports areas, workshops, garages, transport terminals, utility structures and laboratories without a danger of explosion of gases, dust and combustible fumes.

ADVANTAGES

  • Light fitting protection: IP66

  • Maximum ambient temperature: ta = 45 °C, Maximum ambient temperature: ta = 25 °C (version with emergency back-up source for 1 or 3 hours; M1h, M3h)

  • Lifetime: 50,000 hours / L90B10

  • Standard model - CRI > 80: 4000 K

  • The watt and lumen values can, in accordance with valid standards, vary by ± 7,5 %

  • Certification: ENEC, CB, HACCP

MATERIALS / FINISHES

  • Diffuser: translucent polycarbonate (PC), UV stable, impact-resistant

  • Body: grey polycarbonate (PC), UV stable, impact-resistant

  • Reflector: steel sheet, white colour (RAL 9003)

  • Clips: polyamide + 15 % glass fibre or stainless steel + polyamide

  • Sealing: polyurethane (PUR), foamed body groove

  • Cable glands: screwed PG 13,5, or rubber (SBS)

  • Distance part: polyamide + 10 % glass fibre

  • Terminal block: screwless, three-pole (basic version), or screwed

Electric equipment

  • Electric equipment: LED modules, current driver or current driver DALI

Attachment method

  • Attachment with the use of side hangers to the wall

  • Directly to a ceiling or a wall with the use of screws and stainless brackets

  • Suspension with the use of stainless hooks

Installation

  • Package contains stainless hooks and stainless brackets

The light fitting is resistant to dust, moisture and spouting water. The body and the diffuser made of polycarbonate (PC) have the increased resistance against deformation and impact. (It is necessary to consider exhalation in the air which can reduce the usability of the plastic at installations in an aggressive environment).


The sensor is inserted in the luminaire that have fulfills the same as coverage for all luminaires PRIMA LED - IP66 at ambient temperature to 35 °C. Sensors can be controlled with one remote control with a range of up to 8m.




Technical parameters of sensor:

  • Coverage range 360°C

  • Switching height 1-8 meters

  • Sensitivity switching from 2 to 2000 lux

  • Time range from 10 sec - 60 min



We are looking forward to cooperate with limited partners and distributors in Asia-Pacific, please contact to: +84 902 401 488 or trevos@eurostellar.com

-----------------------------------------------------------------------

Eurostellar - Exclusive Representative of Trevos in ASEAN

Hotline: +84 902 401 488

Showroom: 755 Luy Ban Bich St, Tan Phu Dist, HCMC, Vietnam.

8 views0 comments
bottom of page