NANOTTICA | Patent pending nanostructure of LED lighting by Trevos lighting (EU)

The fixture boasts a low unified glare rating with UGR values its patented nanooptics. This ensures eye comfort, high visual performance and workplace safety, which indirectly translates into higher productivity.

Ceiling height from 3.5 to 8 m, impact resistant.

The fitting is highly recommended for illumination of premises where workers’ visual precision is of paramount importance. These include workshops where fine assembly work is performed as well as craft workshops and visual inspection areas. Its standard beam angle makes it a perfect choice for premises with an optimum luminaire installation height of 3.5 to 8 m. It is designed for indoor spaces, industrial premises, agricultural buildings, warehouses as well as sports facilities, transport hubs, car parks and garages, workshops and laboratories with no explosion hazard. IP69-rated and HACCP-compliant, the fitting’s design also makes it a great choice for the food industry. Made of clear polycarbonate, the base and the diffuser boast high impact and deformation resistance. Emissions in the environment of use may reduce the usability of the plastics.


  • Maximum system efficacy: 139 lm/W

  • Low UGR ranging from 18.9 to 23.4

  • Light fitting protection: IP66 / IP69

  • Maximum ambient temperature: ta = 25 °C (version with emergency back-up source for 1 or 3 hours; M1h, M3h)

  • Lifetime: 50,000 hours / L90B10

  • Standard model - CRI > 80: 4000 K

  • At request CRI > 80: 3000 K, 5000 K, 6500 K, CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K

  • Patented optics ensures absolute control over light beam distribution

  • Optional through wiring (up to 7 wires inside the light fitting)

  • It can be delivered in dimmable or emergency version

  • Optimum luminaire installation height from 3.5 to 8 m

  • Multipurpose snap-in mounting clips – easy attachment to a track lighting system with a width of 60 mm

  • Variable suspension pitch; optional installation of light fitting even on an existing structure on which the original light fittings were suspended

  • High mechanical resistance IK10

  • High temperature resistance in a range from ta = -25 °C to ta = 50 °C

  • The watt and lumen values can, in accordance with valid standards, vary by ± 7,5 %

  • MacAdam = 3 SDCM

  • Certification: ESČ, ENEC, CB, HACCP

Materials / finishes

  • Diffuser: transparent PC with nanooptics (high mechanical resistance, UV stability)

  • Body: grey PC (high mechanical resistance, UV stability)

  • Reflector: steel sheet, white colour (RAL 9003)

  • Clips: polyamide + 15 % glass fibre or stainless steel + polyamide

  • Sealing: polyurethane (PUR), foamed body groove

  • Cable glands: screwed PG 13,5, or rubber (SBS)

  • Terminal block: screwless, three-pole (basic version), or screwed


  • Package contains stainless hooks and stainless brackets



We are opening the partner program for all ASEAN Reseller and System integrator.

For more information, please contact to:

Eurostellar Co. Ltd. | Exclusive Representative of Trevos in ASEAN

Hotline: +84 902 401 488



0 lượt xem0 bình luận