European Security, Building Automation
IoT, Lighting Solution
Industrial lighting
WHY YOU SHOULD CHOOSE SUITABLE INDUSTRIAL LIGHTING
Industrial lighting plays a key part in the safety and performance of your business. It’s typically found in warehouses, factories, manufacturing plants and other hazardous workplaces. If these working environments aren’t lit properly, the various hazards that your workforce are exposed to daily become a lot more dangerous.
But what is industrial lighting? And how do you know what lighting solutions are necessary for your business? There’s no one-size-fits-all approach with industrial lighting – each workplace is different, so commands unique requirements and needs. What works for other businesses in your industry may not necessarily work perfectly for you.
If you’re not sure about industrial lighting on the whole, don’t worry. This post will explain everything you need to know. From what industrial lighting is, the benefits it can bring to your business and the environments it can typically be found in
EXTREME TEMPER LIGHTING
The light fitting is suitable for indoor and outdoor spaces with roof with extreme ambient temperatures from (-40°C to +70°C). The light fitting is destined mainly for heating stations, metallurgi-cal lines, glass-works, as well as for freezers, cooling plants and other premises without danger of explosion of gases, dusts and flammable vapors. The light fitting is resistant to dust, moisture and spouting water. The body and the diffuser made of polycarbonate (PC) have the increased resist-ance against deformation and impact. (It is necessary to consider exhalation in the air which can reduce the usability of the plastic and aluminium at installations in an aggressive environment,
TREVOS FROST
For cold stores and freezing facilities with temperatures down to -25 °C
Temperatures of chilled foods range from 0–5 degrees, whilst in freezing facilities can drop up to -25 degrees Celsius. Suitable luminaires for such demanding environments must handle extreme low temperatures, withstand condensation and vapors, have low maintenance and long service life to keep costs low.
Our lighting fixture for freezing storage and chilled storage saroundings is made of ABS material, is weather-proofed and chemically resistant (IP66 and IK 06).
FROST provide with high quality and good solution enduring a long service life of 50 000 hours.
MODUS PL 3500
Luminaire for surface or suspended mounting made of high quality pressed polyester with glass fiber on a base made of white lacquered FeZn sheet and with stainless steel clips for
high material life.
Mechanical resistance IK08 - optical system made of poly carbonate.
The luminaire can be made wirelessly with bluetooth control.
Certification for use in the food industry
ALUMAX LED MAX
Industrial LED light fitting made of grey aluminium section intended for extreme temperatures -40°C to +75°C, with high chemical resistance, with diffuser made of tempered safety glass.
The light fitting is suitable for indoor and outdoor with roof with extreme ambient temperatures from (-40 °C to +75 °C). The fixture is designed especially for refrigeration, cold stores, bakeries, heating plants, metallurgical lines, glass factories and other premises without the danger of explosion of gases, dusts and flammable vapors.
The light fitting is resistant to deformation, dust, spouting water and chemically aggressive environment.
Characteristics of the used tempered glass and its shattering power are controlled by the ČSN EN 12150-1 standard.
ATEX CERTIFICATE EXPLOISIVE LIGHTING
Portable lighting is an essential part of your workplace equipment, especially when working in hazardous environments. Areas need to be well-lit to ensure operations can be completed safely and effectively. But the portable lighting equipment you use also needs to meet equipment requirements and help you create a safe, compliant worksite. We offer robust ATEX portable lighting products, with equipment certified for use in hazardous environments. Our lighting products are shockproof, they feature antistatic plastic parts that avoid all spark risks and they offer low heat emission to reduce risks of flammability. Our ATEX portable lighting also packs a punch and has the power to flood worksites with the light you need to complete tasks safely and with excellent visibility.
TREVOS TrEx
Metal industrial LED light fitting intended for environment with risk of explosion with satinated tempered safety glass.
The metal light fitting with satinated tempered safety glass is suitable for environment with hazard of explosion of gases, vapours and dust for zones 1, 21 and 2, 22. It meets the requirements of the European Community Directive No. 2014/34/EU. It is resistant against chemically aggressive environment, therefore it fits for industrial premises like chemical factories, plants for processing of gases and oil, power plants, army facilities, automotive factories, laboratories and other facilities of heavy and mechanical engineering. The light fitting in IP66 protection is resistant against dust and splashing water.
PRIMA LED EX
Plastic industrial LED light fitting intended for environment with risk of explosion group II, category 3 (zone 2, 22), with diffuser made of translucent polycarbonate.
The light fitting is suitable for the environment with a danger of explosion of gas, dust and combustible fumes. The light fittings meet the requirements of Government Decree 116/2016 Coll. and European Community Directive No.2014/34/EU.
The light fitting is certified for the environment:
-
II 3G Ex nR IIC T6 Gc
-
II 3D Ex tc IIIC T70°C Dc
The basic requirements for safety and health protection are secured by the verification of conformity with the standards according to ČSN EN 60079-15,
ČSN EN 60079-0 and ČSN EN 60079-31.
The light fitting is resistant to dust, moisture and spouting water. The body and the diffuser made of polycarbonate (PC) have the increased resistence against deformation and impact.
TrEx DIS INOX
The metal light fitting with satinated tempered safety glass is suitable for environment with hazard of explosion of gases, vapours and dust for zones 1, 21 and 2,22. It meets the requirements of the European Community Directive No. 2014/34/EU. It is resistant against chemically aggressive environment, therefore it fits for industrial premises like chemical factories, plants for processing of gases and oil, power plants, army facilities, automotive factories, laboratories and other facilities of heavy and mechanical engineering. The light fitting in IP66 protection is resistant against dust and splashing water.
ANTI-CHEMISCAL LIGHTING
Antimicrobial lighting is highly safe – The non-toxic nature of antimicrobial lighting makes it extremely safe to use around humans. The harsh chemicals used in disinfectants and sanitizers lead to several skin diseases.
These lights are environment-friendly as they work on a physical process and do not use any chemicals. Due to no addition of chemicals, it is widely being used by the food industry to keep the food items free from pathogens.
NANOTTICA ES
Energy saver, exceptional efficiency, ceiling height from 3.5 to 8 m, impact resistant.
Compared to its basic version, Nanottica ES boasts lower energy consumption, which translates into considerably higher luminous efficacy (lm/W).
The fitting is highly recommended for illumination of premises where workers’ visual precision is of paramount importance. These include workshops where fine assembly work is performed as well as craft workshops and visual inspection areas.
NANOTTICA ES TRS
Energy saver, exceptional efficiency and UGR, ceiling height from 3.5 to 8 m, impact resistant.
Compared to its basic version, fully transparent Nanottica ES TRS PC boasts considerably lower UGR values as well as lower energy consumption, the latter translating into considerably higher luminous efficacy (lm/W).
The fitting is highly recommended for illumination of premises where workers’ visual precision is of paramount importance. These include workshops where fine assembly work is performed as well as craft workshops and visual inspection areas.
Its standard beam angle makes it a perfect choice for premises with an optimum luminaire installation height of 3.5 to 8 m. It is designed for indoor spaces, industrial premises, agricultural buildings, warehouses as well as sports facilities, transport hubs, car parks and garages, workshops and laboratories with no explosion hazard. IP69-rated and HACCP-compliant, the fitting’s design also makes it a great choice for the food industry.
INNOVA ES
Closed and non-dismountable light fitting according to the standard ČSN EN 60598-1 part 4 intended for chemically challenging or agricultural premises with incidence of vapours like ammonia, lye, alkaline com-pounds and hot water (hydrolysis). Thanks to the Nar-row Beam optics, it is suitable for inside spaces with high ceilings, intended for suspension height from 8 to 12m, e.g. inside walls and corridors of high ag-ricultural and industrial buildings, rack aisles in production and storage spaces, farms, stables and laboratories without explosion hazard. The structur-al design of the light fitting (IP69) allows even place-ment in food-processing industry - HACCP.
The light fitting resists dust, humidity and washing with spouting water up to 80 °C. The body and the diffuser made of ABS material have high chemical resistance.
An external terminal strip makes it easy and quick to connect the supply cable with no need to open the fitting (PLUG and PLAY system).
Emissions in the environment of use may reduce the usability of the plastics;
HIGH EFFICIENCY LIGHTING
The light fitting is suitable for large operations with high ceilings, industrial outdoor and indoor roofed spaces, warehouses, workshops, sports areas, transport terminals and utility structures without a danger of explosion of gas, dust and combustible fumes.
NANOTTICA ES TRS
Energy saver, exceptional efficiency and UGR, ceiling height from 3.5 to 8 m, impact resistant.
Compared to its basic version, fully transparent Nanottica ES TRS PC boasts considerably lower UGR values as well as lower energy consumption, the latter translating into considerably higher luminous efficacy (lm/W).
The fitting is highly recommended for illumination of premises where workers’ visual precision is of paramount importance. These include workshops where fine assembly work is performed as well as craft workshops and visual inspection areas.
Its standard beam angle makes it a perfect choice for premises with an optimum luminaire installation height of 3.5 to 8 m. It is designed for indoor spaces, industrial premises, agricultural buildings, warehouses as well as sports facilities, transport hubs, car parks and garages, workshops and laboratories with no explosion hazard. IP69-rated and HACCP-compliant, the fitting’s design also makes it a great choice for the food industry.
CANOPUS HE
Metal industrial led fitting intended for installation on high ceilings, with sulphur-resistant LED chips.
The light fitting is suitable for large operations with high ceilings, industrial outdoor and indoor roofed spaces, warehouses, workshops, sports areas, transport terminals and utility structures without a danger of explosion of gases, dust and combustible fumes.
The light fitting is resistant to deformation, dust and splashing water.
SUPER ENERGY SAVING LIGHTING
Compared to its basic version, fully transparent Nanottica ES TRS PC boasts considerably lower UGR values as well as lower energy consumption, the latter translating into considerably higher lumi[1]nous efficacy (lm/W). The fitting is highly recommended for illumination of premises where workers’ visual precision is of paramount importance.
NANOTTICA ES
Energy saver, exceptional efficiency, ceiling height from 3.5 to 8 m, impact resistant.
Compared to its basic version, Nanottica ES boasts lower energy consumption, which translates into considerably higher luminous efficacy (lm/W).
The fitting is highly recommended for illumination of premises where workers’ visual precision is of paramount importance. These include workshops where fine assembly work is performed as well as craft workshops and visual inspection areas.
NANOTTICA ES TRS
Energy saver, exceptional efficiency and UGR, ceiling height from 3.5 to 8 m, impact resistant.
Compared to its basic version, fully transparent Nanottica ES TRS PC boasts considerably lower UGR values as well as lower energy consumption, the latter translating into considerably higher luminous efficacy (lm/W).
The fitting is highly recommended for illumination of premises where workers’ visual precision is of paramount importance. These include workshops where fine assembly work is performed as well as craft workshops and visual inspection areas.
Its standard beam angle makes it a perfect choice for premises with an optimum luminaire installation height of 3.5 to 8 m. It is designed for indoor spaces, industrial premises, agricultural buildings, warehouses as well as sports facilities, transport hubs, car parks and garages, workshops and laboratories with no explosion hazard. IP69-rated and HACCP-compliant, the fitting’s design also makes it a great choice for the food industry.
INNOVA ES
Plastic industrial LED light fitting intended for environment with risk of explosion group II, category 3 (zone 2, 22), with diffuser made of transparent polycarbonate.
The light fitting is suitable for the environment with a danger of explosion of gases, dust and combustible fumes. The light fittings meet the requirements of Government Decree 116/2016 Coll. and European Community Directive No.2014/34/EU.
The light fitting is certified ATEX for the environment:
-
II 3G Ex ec IIC T6 Gc
-
II 3D Ex tc IIIC T85°C Dc IP66
The basic requirements for safety and health protection are secured by the verification of conformity with the standards according to ČSN EN 60079-15, ČSN EN 60079-0 and ČSN EN 60079-31.
The light fitting is resistant to dust, moisture and spouting water. The body and the diffuser made of polycarbonate (PC) have the increased resistance against deformation and impact.
(It is necessary to consider exhalation in the air reducing the usability of the plastic at installations in an aggressive environment)
HIGHBAY LIGHTING
High bay lighting is appropriate whenever you have a large indoor workspace needing proper illumination. Some of these large indoor spaces or facilities having high ceilings (20 to 50 feet) include warehouses, manufacturing areas, large department stores, sporting halls, municipal facilities, and more. This kind of facilities, generally, massively covers both vertical and horizontal space. For this reason, the extensive facilities require the use of powerful lighting necessary for adequate illumination as per the demands of each different space requirements.
High bay lighting differs from many other available robust lighting solutions because it does not involve just the use of a single fixture style. The ‘high bay lighting’ is a term used for referring to the positioning of light fixtures and luminaries. For that reason, high bay lighting involves the use of flexible and extensive types of lamp and fittings in large, ceilinged areas.
NANOTTICA ES
Energy saver, exceptional efficiency, ceiling height from 3.5 to 8 m, impact resistant.
Compared to its basic version, Nanottica ES boasts lower energy consumption, which translates into considerably higher luminous efficacy (lm/W).
The fitting is highly recommended for illumination of premises where workers’ visual precision is of paramount importance. These include workshops where fine assembly work is performed as well as craft workshops and visual inspection areas.
NANOTTICA ES TRS
Energy saver, exceptional efficiency and UGR, ceiling height from 3.5 to 8 m, impact resistant.
Compared to its basic version, fully transparent Nanottica ES TRS PC boasts considerably lower UGR values as well as lower energy consumption, the latter translating into considerably higher luminous efficacy (lm/W).
The fitting is highly recommended for illumination of premises where workers’ visual precision is of paramount importance. These include workshops where fine assembly work is performed as well as craft workshops and visual inspection areas.
Its standard beam angle makes it a perfect choice for premises with an optimum luminaire installation height of 3.5 to 8 m. It is designed for indoor spaces, industrial premises, agricultural buildings, warehouses as well as sports facilities, transport hubs, car parks and garages, workshops and laboratories with no explosion hazard. IP69-rated and HACCP-compliant, the fitting’s design also makes it a great choice for the food industry.
INNOVA ES
Plastic industrial LED light fitting intended for environment with risk of explosion group II, category 3 (zone 2, 22), with diffuser made of transparent polycarbonate.
The light fitting is suitable for the environment with a danger of explosion of gases, dust and combustible fumes. The light fittings meet the requirements of Government Decree 116/2016 Coll. and European Community Directive No.2014/34/EU.
The light fitting is certified ATEX for the environment:
-
II 3G Ex ec IIC T6 Gc
-
II 3D Ex tc IIIC T85°C Dc IP66
The basic requirements for safety and health protection are secured by the verification of conformity with the standards according to ČSN EN 60079-15, ČSN EN 60079-0 and ČSN EN 60079-31.
The light fitting is resistant to dust, moisture and spouting water. The body and the diffuser made of polycarbonate (PC) have the increased resistance against deformation and impact.
(It is necessary to consider exhalation in the air reducing the usability of the plastic at installations in an aggressive environment)
OTHER LIGHTINGS
EXIT
This stylish and modern combo unit is perfect for any high-end design application. This unit combines a beautiful edge-lit exit sign and adjustable emergency lights on a sleek recessed mount. The premium aluminum housing and V-stabilized ultra-clear acrylic paneling make this exit sign architecturally pleasing. Field installable directional arrows for easy and fast configuration. For a double-sided sign, select the “double-sided mirrored panel” from the sides drop-down box. Includes a lightweight, maintenance-free NiCad battery, providing 90 minutes of emergency illumination in case of a power failure. Compatible with both sheetrock and drop ceiling/remodel applications. This exit sign operates 120-277 VAC.
EMMERGENCY
Protect your building's occupants and provide safety with this LED Dual-Head Emergency Light. This LED emergency light produces ultra-bright, energy efficient, long life bright white light and complies with building fire codes and insurance standards.
This LED Emergency Light has dual light heads to provide illumination in the event of power outage. Each head is .5W with 1 LED per head. The adjustable LED lamp heads provide optimal emergency lighting where needed.
This LED emergency light is made with injection-molded, engineering grade, 5VA flame retardant, high-impact resistant, thermoplastic in white finish. Surface mount via easy connect back plate, which fits most standard junction boxes and snaps into place making internal electrical connections. Suitable for wall or ceiling mount and knockouts for conduit applications.
OUTDOOR
The Wattage Adjustable and Color Tunable LED Wall Pack Light is designed for outdoor illumination in areas such as perimeter walls or fences, walkways, building exteriors, loading docks, and many other large outdoor areas. This LED wall pack represents the classic shape of an HID area light while using a fraction of the energy. These LED Wall Packs are equivalent to up to 400W metal halide wall packs and can save you up to 70% on energy costs and save you the maintenance of replacing bulbs over the life of the fixture.
This fixture is wattage adjustable allowing the user to select between 72W, 96W, and 120W for different brightness to accommodate various mounting heights.