The KEBA Charging Station is ideally for LOXONE Smart Home and EV or HPEV.
Plug & Play charging station KEBA with adjustable power ideal for the company - Loxone Ready!
The charging station Keba KeContact P30 series-b connects single-phase or three-phase a adjustable intensity between 10A and 32A . It can therefore accommodate the available power of your business or home. Its front lockable plug T2S will ensure a safe charging of your electric car mode 3.
The power load is adjustable between 2.3 and 22 kW, with Dipswitches buttons inside the charging station, editable easily.
The wide adjustable power of Keba charging station b makes it a very versatile charging station that will fit both a house, a garage or a parking of a company.
The function " Auto Recovery " allows, in case of power failure, overheating or failure of the RCD, to take charge as soon as the power is restored.
This charging station in Plug & Play : just plug the cable and charging starts automatically.
Recharge: Up to 100km more runtime per charge time (if charging to 22kW).
Key Features
Activation: (Plug & amp; Play). No RFID card reader
Setting the charging current to 10A, 13A, 16A, 20A, 24A or 32A
Possible single-phase or three-phase connection
CC leakage current detection
Overcurrent detection
IP54 and IK08: resists rain and shocks
Plug: Type 2S. Socket with safety shutter
Wall mounting kit included
Options
Charging station stand for one charging station
Charging station for two charging stations
Triangle charging station stand for two charging stations
Circuit Protection
The following electrical protection are required and are installed on a dedicated line, with cable section 2,5mm² is 20A circuit breaker, and 10mm² if 40A circuit breaker. They were approved by electricians , and respect the current French regulations:
Type A differential switch 40A 30mA (type B is not required for KEBA) (eg HAGER BDH440F) - not included
Circuit breaker 16A to 40A Curve C (depending on the setting of the charging station) (eg HAGER NGT840 40A) - not included
Shunt trip 230 / 415V (required for the ZE Ready) (eg, HAGER MZ203 ) - not included
User Interface
charging station to open access Plug & amp; Play: you plug and charging starts automatically
LED Headband indicating charge status and LCD display indicating power consumption
RJ45 Ethernet interface to connect with a PC: Technical parameter setting and adding / removing RFID cards
USB interface for firmware updates
For more information, please contact to:
Eurostellar | European Technology Solution
Hotline: +84 902 401 488
Email: info@eurostellar.com
Showroom: 755 Luy Ban Bich St., Tan Phu District, Ho Chi Minh City, Vietnam.