The new Jablotron 100+ was launched at the beginning of 2019. With that product innovation, an alarm system with extensive options and new features is brought to the market.
The new version meets the needs of large homes, apartment complexes, schools and larger commercial buildings. The solid building block structure of the Jablotron 100+ system remain, the new system works on the same principles: the MyJablotron app and the user-friendly control panel were retained.
The New Control Panel
The R&D department of Jablotron has designed completely new control panels that give access to a maximum of 600 users, there were 300 in the previous model. The new control panel can establish connections to 230 devices, in the previous version 120. The Jablotron JA-107K is thus the most extensive panel of Jablotron ever, the Jablotron JA-103K has up to 50 users and 50 devices (zones).
The new alarm system also offers considerably more control options. Instead of 32 devices, 128 are now possible. In combination with 64 calendar events (with the previous version 20), the bar is set a lot higher with regard to 'home automation'. The new features and parameters of the system meet the needs of a fully automated and optimally secured building.
The control panels use a new version of the F-link configuration software to make it easier for installers to install and monitor larger systems. With new features, such as the day / night mode, which uses the astronomical calendar, and - with the help of GPS coordinates - sunrise and sunset can be determined very accurately at a certain location.
All existing 100 components can simply be connected to the Jablotron JA-103K and JA-107K control panels. All new 100+ components cannot be connected to the older JA-101K and JA-106K panels.
4G/LTE Technology
Jablotron company has just launched a new communication module with LTE/4G technology for the first time applied on Jablotron anti-theft alarm systems, aiming to serve markets in Europe and Asia. plan to turn off 2G signal in the near future.
At the same time, With the 4G module you will enjoy outstanding advantages: connection speed, upload and download speed are all improved.
Innovative products
In addition, Jablotron also brought the following innovative products to the market: a ceiling detector with 360º coverage, a wireless plug-in siren for interior spaces with new design and improved acoustic performance, and a motion detector with basic PET immunity up to 25 kg and with a maximum height of 40 cm. New compact versions of the design-live sensors have been released, both wired and wireless.
JA-122PW+ / JA-122PW(G)+ Double PIR and microwave technology BUS motion detector with white or gray lens.
JA-162PW+ / JA-162PW(G)+ Dual technology PIR and microwave wireless motion detector with white or gray lens.
JA-196PL-L The bracket has been designed for mounting a combined PIR and MW detector, JA-122PW+ or JA-162PW+, on a PCP or brick wall.
REMOTE CONTROLS
JA-152J MS II+ Bi-directional two-way control
JA-154J MS II+ Bi-directional four-way control
New F-LINK Version
Bigger - Stronger - Faster
The description follows the F-Link tab by tab from Initial setup to Communication, continues
with Main bar and at the end highlights other important news in F-Link and the system.
1. INITIAL SETUP
2. SECTIONS
Automatic setting – new function connected with ‘Report unset section’. A section can be automatically set when there was no movement for a certain time (when unset section is reported). Time to report unset section and time for automatic setting can be configured in the tab Parameters.
‘Section disabled’ option has been removed. Maintenance mode can be used instead.
3. DEVICES
PG activation – 1 detector can activate more PG outputs.
Final door – new reactions in Devices ‘Final door A, B, C’ shortens the Exit delay to 5 seconds when the detector is deactivated.
Bus booster – new Internal settings, two different ‘Range settings’: 1-120 and 121-230.
Keyfob internal settings – control panel remembers the keyfob settings unless it was deleted from the position in F-Link completely. If you enroll a new keyfob to the same position (by rewriting the SN – Production code) the settings of the keyfob remain the same.
Segment naming – names of the segments are saved in the control panel (it is newly possible to name the Common segment)
Day/night mode in keypad internal settings – keypad can react to a new status in the system – Day/Night.
4. USERS
Sample – new column allows to copy the authorization settings from a pattern user.
System control – system reports only the actions of ticked users.
5. PARAMETERS
Day/night mode – new status in the system can be set in Date/Time settings. Option 1 – Astronomical calendar using GPS coordinates (Latitude, Longitude). Option 2 – using hardware solution (luminance sensor) – Device selection. Day and night time can be adjusted by ‘Time correction’.
6. DIAGNOSTICS
In the column ‘Voltage/loss’ F-Link newly monitors the current consumption of each BUS - including BUS 3 and JA-120Z. It monitors the current consumption regarding the power supply back-up. If the current consumption exceeds the limit the cell turns to red.
7. CALENDARS
New columns ‘Days of month’ and ‘Months of year’ allows the system to perform an action in a specific day of a year.
‘Technical inspection’ informs an installer about a need of technical inspection in a certain day.
Two different types in Timing – ‘Four Static times’ or ‘Repeat’
8. COMMUNICATION
GSM settings are available only when the communicator is connected.
GSM communication test in GSM settings.
Test DNS now works in a same way as the communication test during registration and therefore is more accurate.
Cameras settings of IP address, WDR function, IR Illumination and more
9. MAIN BAR
Maintenance mode for Administrator users – for battery replacement, can be disabled, not available in EN profile, only when disarmed, detectors don’t send alarm information, doesn’t affect PG outputs.
RF signal – more detailed diagnostic of RF signal distinguishes between signals from the System device, Unknown devices and the RF signal background.
Events - ‘Range’ – new option of displaying the Events let you choose from which date to which you want to see the events.
10. OTHER NEW IMPORTANT FUNCTIONS AND FEATURES
Grey positions – not changed positions (in default setting) are colored grey. These positions are not downloaded when downloading the configuration and therefore it’s faster.
Support of new Bi-directional devices (advantage of remote configuration).
Import of configuration from current control panels to new control panels is possible almost without any limitation.
F-Link 2.0.0. contains FW packages of current system and the new one as well so it makes it little big bigger.
Detectors newly do not signal the Alarm memory.
In KRY control panel versions the radio is automatically enrolled to the first position.
The configuration is stored in the internal memory of the control panel – this allows to use the panel in “emergency mode” without SD card (events and pictures cannot be saved).
---------------------------------------------------------------------------------
For more information, please feel free to contact to us:
Eurostellar - Representative of Jablotron in Southeast Asia Region
Showroom: 449/63 Truong Chinh Street, Tan Binh District, Ho Chi Minh City, Viet Nam
Hotline: +84 902 401 488
Email: info@eurostellar.com
Website: www.eurostellar.com