Plastic industrial LED light fitting intended for environment with risk of explosion group II, category 3 (zone 2, 22), with diffuser made of translucent polycarbonate. The light fitting is suitable for the environment with a danger of explosion of gases, dust and combustible fumes. The light fittings meet the requirements of Government Decree 116/2016 Coll. and European Community Directive No.2014/34/EU. The light fitting is certified ATEX for the environment:
II 3G Ex ec IIC T6 Gc
II 3D Ex tc IIIC T85°C Dc IP66
The basic requirements for safety and health protection are secured by the verification of conformity with the standards according to ČSN EN 60079-15, ČSN EN 60079-0 and ČSN EN 60079-31. The light fitting is resistant to dust, moisture and spouting water. The body and the diffuser made of polycarbonate (PC) have the increased resistence against deformation and impact. (It is necessary to consider exhalation in the air reducing the usability of the plastic at installations in an aggressive environment).
Description
Advantages
Maximum system efficacy: 141 lm/W
Light fitting protection: IP66
Maximum ambient temperature: 0°≤Ta≤+50° (version with emergency back-up source for 1 or 3 hours; M1h, M3h)
Maximum ambient temperature: -25°≤Ta≤+55°
Lifetime: 50,000 hours / L90B10
Standard model - CRI > 80: 4000 K
The watt and lumen values can, in accordance with valid standards, vary by ± 7,5 %
Certification ATEX: AR19ATEX004
Certification M1h, M3h: ATEX AR19ATEX047
Terminal block: screwless, five-pole (version 1.4ft and 1.5ft), three-pole incl. earthing tape & screw for a perfect connection (basic version)
Materials / finishes
Ventilation plug steel, size M12 × 1,5 ATEX (for version with emergency back-up source M1h, M3h)
Diffuser: translucent polycarbonate (PC), UV stable, impact-resistant
Body: grey polycarbonate (PC), UV stable, impact-resistant
Reflector: steel sheet, white colour (RAL 9003)
Clips: stainless steel + polyamide + 15 % glass fibre
Cable glands: screwed M20 × 1,5 ATEX
Distance part: polyamide + 10 % glass fibre, it is used for reflector attachment during assembly
Electric equipment
LED modules, current driver, halogen-free wires with higher temperature resistance
Attachment method
Attachment with the use of side hangers to the wall
Directly to a ceiling or a wall with the use of screws and stainless brackets
Suspension with the use of stainless hooks
Installation
Package contains stainless hooks and stainless brackets
Feature
Dustproof, waterproof and impact-resistant plastic industrial LED light fittings.
The PRIMA LED product line includes industrial LED light fittings suitable for use in roofed indoor and outdoor spaces, IP66. The LED light fitting is resistant to dust, moisture and spouting water. Its body and the diffuser are made of polycarbonate (PC) and have increased resistance against deformation and impact.
The basic variants are suitable for storage buildings, sports facilities, workshops, garages, transport terminals, agricultural buildings and laboratories without risk of explosion of gases, dust and flammable vapours.
The range of products includes also variants of LED light fittings intended for outdoor spaces, chemically strained environment with presence of ammonia vapours, lyes, alkaline compounds and hot water (hydrolyse).
Thanks to high luminous efficiency and low power consumption, the PRIMA LED light fitting constitutes an ideal substitute for fluorescent light fittings.
For more about Trevos lighting, please kindly visit our website: www.eurostellar.com/trevos
----------------------------------------------
Eurostellar - The Representative of Trevos Lighting in Southeast Asia Region
Showroom: 449/