[JABLOTRON] F-LINK SOFTWARE UPDATE: NEW VERSION 3.0.4

12 hours ago

2 min read

F-Link version 3.0.4 officially expands support for the JA-108K control panel, fully integrates system profiles compliant with EN 50131-1 Grade 3 security standards, adds new peripheral devices, and resolves several system bugs to optimize configuration accuracy and improve the user interface experience.

🚀 What's New?

JA-108K support

The JA-108K control panel is now fully integrated into F-Link — including the EN 50131-1 Grade 3 system profile and all accompanying peripheral and system parameter settings.

EN 50131-1 Grade 3 support

The new version introduces a complete system profile for Grade 3 on the JA-108K. It includes:

Configuration of peripherals JA-116E, JA-111H TRB, JA-113A and JA-113M to meet the requirements of the standard
Monitoring of the minimum required peripheral firmware version
Restriction of ARC settings and system parameters of the control panel to comply with the profile
New system events:
- High voltage or current draw on the bus
- Recording of configuration write failures
- Recording of "Unknown user" in case of invalid authorisation
Exiting service mode is now blocked if an anti-masking fault is active on a detector connected via the JA-111H TRB
New behaviour when the maximum number of invalid code login attempts is exceeded
Low residual energy indication in JA-113A diagnostics
Prohibition of use of identification cards and tags for users
New settings section "Advanced settings" in the Parameters tab

New peripherals: JB-112TH and JB-112TP

F-Link 3.0.4 now supports CO₂-measuring thermostats — JB-112TH and JB-112TP.

Minor configuration improvements

JA-151R: new parameter "Connection without battery"
Additional information added in the authorisation element learning dialog when learning MIFARE-standard elements by presenting a tag
JA-156J: parameters "Optical signalling" and "Acoustic signalling" have been merged into one - "Optical and acoustic signalling"; a "Button press signalling" parameter has also been added

What's fixed?

Factory values and default settings

JA-112J: incorrect factory value of the "PG control" parameter corrected to "PG on/PG off"
JB-128N: factory values for PG outputs and pump protection and anti-freeze protection parameters corrected
JB-111TH, JB-111TP, JB-151TH, JB-151TP: incorrect default thermostat values and display in non-Czech language versions corrected
JA-112M: settings updated in the EN 50131-1 Grade 2 and Incert profile
JA-111H AD TRB: parameters "TMP input" and "LED indication" corrected

False incompatibility reports

JA-110R-80 and JA-111R-80 incorrectly reported incompatibility
JA-121PB incorrectly reported incompatibility in JA-101K and JA-106K control panels
Invalid "Settings do not meet the selected profile" message when exiting service mode on systems with the default profile

User interface fixes

JA-156J, JA-157J, JA-154J MS II, JA-152J MS II: schematic icons and object map icons corrected
JA-162M: alignment of DIP switch display in the internal settings preview
Segment keypads: corrected swapping of A/B lock display on mouse hover
Firmware update dialog: persistent "Always on top" priority removed — other windows can now correctly be brought to the foreground
Update loop on a new factory-fresh control panel - fixed
Incorrect event ordering in the Events from memory dialog - fixed
Incorrect LED indication settings for JA-111R, JA-112R, JA-151R - fixed